> I don't use a Sonoff USB, but I do use a Zooz 800 USB for my z-wave devices. Are the others having this problem also using some similar USB devices?
I have this problem on both rpi5 ha instalk...
another idea:
rename the rtc sensors to "_raw" and add precisoin: 0
sensors:
- name: Wattsonic RTC 1 RAW
unique_id: wattsonic_rtc_1_raw
slave: 247
address: 10...
since ha 2024-3 the firmware shows 1.00,0.00,0.00,0.01 instead of 1,0,0,1 and 27.00,53.00,5.00,0.00 instead of 27,53,5,0
the same at the rtc registers
we have to add this last line in the wattson...
i have seen on both pi5 with the ssd boot problem the status of boot slot b is "bad"
problem with rauc? maybe pri wants to reboot in slot b?
![image](https://github.com/user-attachments/assets/...
> I've done 50x ssh root@IP -p 22222 "reboot" and 50x ssh root@IP -p 22222 "ha host reboot" -> every reboot was succesful and it booted up normally. Only the system reboot functionality in the web ...
same problem
pi5 with ssd hat reboot fails sometimes
normally fan runs 2 seconds on boot / reboot, if reboot fails the fan stays on
same problem on 2 different installations (original ssd hat an...