Ecosyste.ms: Timeline
Browse the timeline of events for every public repo on GitHub. Data updated hourly from GH Archive.
brucetony created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
Just set mine up and it runs off the official raspberry pi 5 power adapter just fine. GeeekPi includes a USB-C jumper to run between the Pi5 and the HAT, and then the HAT has a separate USB-C for p...
Steve-Tech created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
Hey Jeff, I was just curious if this supported 4K Native Advanced Format. You can check using either `nvme id-ns -H /dev/nvme0n1` or `smartctl -c /dev/nvme0n1`, and it'll be down the bottom as L...
Hanish94 created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
> Technically one 3.5 inch drive works on the hat, but no other can fit due to the spacing. I bought 20 cm sata + power extender cables from AliExpress to fit more 3.5inch drives. > […](#) > On T...
cassid4 created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
Technically one 3.5 inch drive works on the hat, but no other can fit due to the spacing. I bought 20 cm sata + power extender cables from AliExpress to fit more 3.5inch drives. On Thu, Oct 2...
axiopaladin created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
> Can anyone please tell me if 3.5inch HDD fits in this hat ?? It would be great if you share a picture of how many 3.5 inch HDD gets fits in the right slot. > > I am planning to buy this hat bu...
Hanish94 created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
Can anyone please tell me if 3.5inch HDD fits in this hat ?? It would be great if you share a picture of how many 3.5 inch HDD gets fits in the right slot. I am planning to buy this hat but uns...
Coreforge created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
I tried messing around with the address ranges a bit more, and I could not get it to work if I moved any of the ranges outside of the 16GB window (I adjusted the ranges for the axi bus accordingly ...
yeongbba created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
``` # nvidia-smi No devices were found ``` ``` 2024-10-23T18:08:55.806865+00:00 worker01 kernel: NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x25:0x65:1468) 2024-10-23T18:08:55.806888+00...
DanaGoyette created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
I'll have to try tweaking those patches for my LX2160A (likely just make the workaround always apply on any ARM64). When so many different ARM64 SOCs have similar pickiness about write ordering ...
github-actions[bot] pushed 1 commit to gh-pages geerlingguy/raspberry-pi-pcie-devices
- deploy: 357d9a8c063cb205614b468c2bde86934a8fdd42 c8ade93
geerlingguy pushed 1 commit to master geerlingguy/raspberry-pi-pcie-devices
- Update Pi 5 compatibility for Pi SSD. 357d9a8
geerlingguy created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
Benchmarking... here's a listing on [harddrivebenchmark.com](https://www.harddrivebenchmark.net/hdd.php?hdd=SAMSUNG+MZ9LQ256HBJD-00BVL) for the Samsung. And on the Pi 5, running my [disk-benchma...
geerlingguy created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
lspci output: ``` 0000:01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller 980 (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd NVMe SSD Con...
geerlingguy created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
On the site here: https://pipci.jeffgeerling.com/cards_m2/raspberry-pi-ssd.html
github-actions[bot] pushed 1 commit to gh-pages geerlingguy/raspberry-pi-pcie-devices
- deploy: 304ec20f2778afaac1fdd92da1587e38d3287d62 5a06703
geerlingguy pushed 1 commit to master geerlingguy/raspberry-pi-pcie-devices
- Issue #679: Add Raspberry Pi SSD. 304ec20