Ecosyste.ms: Timeline
Browse the timeline of events for every public repo on GitHub. Data updated hourly from GH Archive.
brucetony created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
Just set mine up and it runs off the official raspberry pi 5 power adapter just fine. GeeekPi includes a USB-C jumper to run between the Pi5 and the HAT, and then the HAT has a separate USB-C for p...
Steve-Tech created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
Hey Jeff, I was just curious if this supported 4K Native Advanced Format. You can check using either `nvme id-ns -H /dev/nvme0n1` or `smartctl -c /dev/nvme0n1`, and it'll be down the bottom as L...
Hanish94 created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
> Technically one 3.5 inch drive works on the hat, but no other can fit due to the spacing. I bought 20 cm sata + power extender cables from AliExpress to fit more 3.5inch drives. > […](#) > On T...
cassid4 created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
Technically one 3.5 inch drive works on the hat, but no other can fit due to the spacing. I bought 20 cm sata + power extender cables from AliExpress to fit more 3.5inch drives. On Thu, Oct 2...
axiopaladin created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
> Can anyone please tell me if 3.5inch HDD fits in this hat ?? It would be great if you share a picture of how many 3.5 inch HDD gets fits in the right slot. > > I am planning to buy this hat bu...
Hanish94 created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
Can anyone please tell me if 3.5inch HDD fits in this hat ?? It would be great if you share a picture of how many 3.5 inch HDD gets fits in the right slot. I am planning to buy this hat but uns...
Coreforge created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
I tried messing around with the address ranges a bit more, and I could not get it to work if I moved any of the ranges outside of the 16GB window (I adjusted the ranges for the axi bus accordingly ...
yeongbba created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
``` # nvidia-smi No devices were found ``` ``` 2024-10-23T18:08:55.806865+00:00 worker01 kernel: NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x25:0x65:1468) 2024-10-23T18:08:55.806888+00...
DanaGoyette created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
I'll have to try tweaking those patches for my LX2160A (likely just make the workaround always apply on any ARM64). When so many different ARM64 SOCs have similar pickiness about write ordering ...
github-actions[bot] pushed 1 commit to gh-pages geerlingguy/raspberry-pi-pcie-devices
- deploy: 357d9a8c063cb205614b468c2bde86934a8fdd42 c8ade93
geerlingguy pushed 1 commit to master geerlingguy/raspberry-pi-pcie-devices
- Update Pi 5 compatibility for Pi SSD. 357d9a8
geerlingguy created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
Benchmarking... here's a listing on [harddrivebenchmark.com](https://www.harddrivebenchmark.net/hdd.php?hdd=SAMSUNG+MZ9LQ256HBJD-00BVL) for the Samsung. And on the Pi 5, running my [disk-benchma...
geerlingguy created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
lspci output: ``` 0000:01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller 980 (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd NVMe SSD Con...
geerlingguy created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
On the site here: https://pipci.jeffgeerling.com/cards_m2/raspberry-pi-ssd.html
github-actions[bot] pushed 1 commit to gh-pages geerlingguy/raspberry-pi-pcie-devices
- deploy: 304ec20f2778afaac1fdd92da1587e38d3287d62 5a06703
geerlingguy pushed 1 commit to master geerlingguy/raspberry-pi-pcie-devices
- Issue #679: Add Raspberry Pi SSD. 304ec20
geerlingguy opened an issue on geerlingguy/raspberry-pi-pcie-devices
Raspberry Pi SSD
Raspberry Pi is now selling the [Raspberry Pi SSD](https://www.raspberrypi.com/products/ssd/), a 2230-size NVMe SSD rated at PCIe Gen 3 speed. 
geerlingguy created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
@Coreforge - Apparently chimera-linux is maintaining a set of patches for the AMD issues on Ampere, in case you want to look at a consolidated set: https://github.com/chimera-linux/cports/tree/mast...
6by9 created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
PCIe isn't my area of expertise. I think I recall notes saying that the windows have the same power of 2 alignment as the size, so 16GB needs to be 16GB aligned. I thought 64GB (36bit) was the ...
geerlingguy created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
@6by9 may have more input regarding BAR allocations; tbh that's also beyond my limits in terms of messing with the device tree. Would be nice if the limit could be increased for future-proofing. Ra...
Coreforge created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
I haven't gotten much further on the VCN issues so far. I need to track down where the address comes from that produces the fault, and I haven't found it yet. According to `umr`, the PTE is not val...
6by9 created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
(My RX460 is now working fine with a 12V 8A PSU on barrel connector to the uPCIty Lite, not that I'm overly stressing it. I've also got an 8GB RX580 on its way....)
yoyojacky created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
> > You can replace the long pillars with short pillars > > True, but it only comes with the long ones. :) BTW, send e-mail to [email protected] will be ok.
yoyojacky created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
> > You can replace the long pillars with short pillars > > True, but it only comes with the long ones. :) Oh, what the length do you want to use? please send the e-mail to me, i will arrange...
jamesfmackenzie created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
I have an RX580 and 6600XT. Currently waiting for the GPU dock but will try both once I have it.
geerlingguy created a comment on an issue on geerlingguy/raspberry-pi-pcie-devices
@Coreforge - FYI, many in the YouTube comments on my latest video are mentioning that the hardware transcoding support in the 460 in particular was a bit 'over-advertised', so it might be better to...