Ecosyste.ms: Timeline
Browse the timeline of events for every public repo on GitHub. Data updated hourly from GH Archive.
andig created a comment on a pull request on evcc-io/evcc
Not sure. I'd probably try something like this: ```yaml batterymode: source: switch switch: - case: 1 # normal set: source: wait_for_response # maybe `validate` set...
Peacecamper created a comment on an issue on evcc-io/evcc
> @Peacecamper das liegt am Auto, machen alle VW Derivate aktuell, siehe bspw. #17318 #17238 https://www.meinid.com/thread/5372-ac-laden-id4-schaltet-beim-laden-von-3-auf-2-phasen-alfen-eve-single-...
Diondk opened an issue on evcc-io/evcc
Keep getting following error: Garage: charger status: outdated
### Describe the bug I am trying to get a bicycle charger in EVCC by using a MQTT plug, the chargepoint is loaded but i keep getting the error: Garage: charger status: outdated Seems to be some...
andig created a comment on an issue on evcc-io/evcc
> to trigger EVU lock/unlock. That sounds like dimm, not boost? The other SG ready chargers boost the heatpump when PV is available and return to normal when not. Locking sounds like your home w...
skrul created a comment on a pull request on evcc-io/evcc
@andig can you go into a little more detail on how you think `wait_for_response` should be implemented (like show what the config would look like)? I think building something that would be useful t...
BOFH90 created a comment on an issue on evcc-io/evcc
> This is correct, but exactly this does not require knowledge and control over temperatures. I do this with my Warmwater-Heat pump and control the temperature and shut the SG-Ready Contact off ...
kjohann7 created a comment on an issue on evcc-io/evcc
ok - thank you luckily it is not too often needed to restart
kjohann7 closed an issue on evcc-io/evcc
Confuses cars connected to wallboxes
### Describe the bug I have 2 Wallboxes and 2 cars. Configuration is EVCC to detect which car ist connected to the Wallbox. Sometimes EVCC mixes the cars up: - Car 1 is connected to wallbox 1 but...
skrul created a comment on a pull request on evcc-io/evcc
@andig my understanding is that, while the lux inverter ostensibly has a modbus interface, the protocol is non-standard lux proprietary and will not work with standard modbus implementations. the [...
VolkerK62 created a comment on an issue on evcc-io/evcc
car detection based on the comparison of the charge status. Both cars have status B and both chargers have status B. So no way for identification
stevoboy created a comment on a pull request on evcc-io/evcc
> @stevoboy mach bitte ein neues Thema für Dimplex. Bitte mehr Beschreibung was Du mit Sperre/freischalten meinst. Just did: https://github.com/evcc-io/evcc/issues/18085 Thanks
dog-rgb created a comment on an issue on evcc-io/evcc
Fine for me, thanks. So I will set it before creating the certificate.
stevoboy opened an issue on evcc-io/evcc
GlenDimplex SGReady Heatpump >>> Lock/ID1/ID2 Support
I would like to request EVCC to work with our SG Ready Heatpump. **Currently already working Loadpoint>Status> Enable (No. 1):** - Lock/Unlock the heatpump for cheap net tarifs and PV surplus...
dog-rgb created a comment on an issue on evcc-io/evcc
Sounds good in general. But for me it is not clear where to put the name definition for EEBUS_DEVICE_CODE. Into the evcc.yaml or to the environment variables or ...?
andig created a comment on an issue on evcc-io/evcc
> MinPV = 16A Why do you have a minpv current of 16A? > metervalues: Why are you configuring this?
kjohann7 created a comment on an issue on evcc-io/evcc
HIer noch ein paar Fehlermeldung, die später aufgetaucht sind, vielleicht aber auch helfen: [site ] ERROR 2025/01/06 17:17:10 battery mode: modbus: exception '2' (illegal data address), function...
wpb52 created a comment on an issue on evcc-io/evcc
Here is the log. Test started 16:05 LondonTime. [2025.01.06 16h05 evcc.log](https://github.com/user-attachments/files/18322097/2025.01.06.16h05.evcc.log)
andig opened a pull request on evcc-io/evcc
EEBus: make device code configurable
Fix https://github.com/evcc-io/evcc/issues/18077
andig closed an issue on evcc-io/evcc
BMW, PulsarPlus - MinPV mit max. Leistung
### Describe the bug Ich habe 2 Testreihen durchgeführt und einen Fehler und ein Workarround gefunden. Ziel ist es `Min+PV` ein zu stellen. `Min+PV` nach `Aus `funktioniert nicht, es wird immer m...
wpb52 opened an issue on evcc-io/evcc
BMW, PulsarPlus - MinPV mit max. Leistung
### Describe the bug Ich habe 2 Testreihen durchgeführt und einen Fehler und ein Workarround gefunden. Ziel ist es `Min+PV` ein zu stellen. `Min+PV` nach `Aus `funktioniert nicht, es wird immer m...
andig created a comment on an issue on evcc-io/evcc
Perfekt. Den Screenshot brauchts nicht, der Fehler ist nachvollziehbar. /cc @premultiply
kjohann7 created a comment on an issue on evcc-io/evcc
Hier der was sich in der Commandline abgespielt hat: kjohann@raspberrypi:~ $ sudo systemctl stop evcc kjohann@raspberrypi:~ $ evcc meter --battery-mode hold [main ] INFO 2025/01/06 16:17:23 e...
premultiply created a comment on an issue on evcc-io/evcc
This is correct, but exactly this does not require knowledge and control over temperatures.
andig created a comment on a pull request on evcc-io/evcc
@stevoboy mach bitte ein neues Thema für Dimplex. Bitte mehr Beschreibung was Du mit Sperre/freischalten meinst.
stevoboy created a comment on a pull request on evcc-io/evcc
Hallo zusammen, Ich habe nicht ganz verstanden wie das Feature funktioniert und ob ich es in der yaml als Template aktivieren kann. Der usecase klingt aber interessant. Ich habe eine Dimplex WP mi...